SAVING LIGHT
Use natural Lights ->
I know I am stating the obvious here but it's Best that i start with this point because even this obvious point has been ignored and neglected. Alot of people have a tendency of switching the lights ON in the afternoon, I mean come on can't you just open that door/window or remove the curtain for once and use the natural light our planet gets? Maximizing your use of natural light will not only save on lighting bills, but will also help to eliminate germs, dust mites or sometimes even that stinky smell you might get in your room.
Here are few pointers to maximize the use natural light :-
> Paint interior walls in pale shades and use mirrors to reflect natural light, particularly in dark rooms.
> On bright sunny days (that are not too hot), open blinds and curtains to admit as much light as possible.
> If your house is especially dark, think about installing large windows - make them taller rather than wider, to admit more light.
> Situate work areas, such as desks and kitchen sinks and benches, close to sources of natural light.
There are many other ways to maximize the efficiency of lights used around the house. Here are some smart tips on how you can save on lighting.> On bright sunny days (that are not too hot), open blinds and curtains to admit as much light as possible.
> If your house is especially dark, think about installing large windows - make them taller rather than wider, to admit more light.
> Situate work areas, such as desks and kitchen sinks and benches, close to sources of natural light.
Which kind of Lighting should be used?
Aesthetics are important when it comes to lighting, but choosing the right light for each location is just as crucial. An Appropriate, efficient light will not only increase comfort, it will also save energy and reduce long-term cost. Fortunately, a host of efficient lighting options is available.
Aesthetics are important when it comes to lighting, but choosing the right light for each location is just as crucial. An Appropriate, efficient light will not only increase comfort, it will also save energy and reduce long-term cost. Fortunately, a host of efficient lighting options is available.
> Conventional incandescent light bulbs are inefficient because most of the energy used to run them is turned into heat rather than light. Though they are cheap to buy, they have to be replaced regularly. Limit your use of incandescent bulbs to areas where you need light instantly and only or a short time.
> Consider using halogen bulbs, which throw a bright light similar to natural light, to illuminate a work area or to spotlight a painting. They may cost more but will outlast regular bulbs.
> Save with fluorescent tube lights. They consume about one quarter of the energy of equivalent incandescent bulbs and last 15 times longer.
> Use tubelights where you need light for long periods - for example in kitchens or living areas.
> Next time you need to replace a conventional light bulb, try a compact fluorescent lamp (CFL), then gradually replace all incandescent bulb with CFL's in high-use areas.
> Look for "non- Integrated" CFLs that come in two pieces: a fitting and a bulb. That allows you to replace just the bulb rather than the whole unit.
> Consider using halogen bulbs, which throw a bright light similar to natural light, to illuminate a work area or to spotlight a painting. They may cost more but will outlast regular bulbs.
> Save with fluorescent tube lights. They consume about one quarter of the energy of equivalent incandescent bulbs and last 15 times longer.
> Use tubelights where you need light for long periods - for example in kitchens or living areas.
> Next time you need to replace a conventional light bulb, try a compact fluorescent lamp (CFL), then gradually replace all incandescent bulb with CFL's in high-use areas.
> Look for "non- Integrated" CFLs that come in two pieces: a fitting and a bulb. That allows you to replace just the bulb rather than the whole unit.
Smart Lighting
> Select the lowest acceptable wattage for all lights. More watts mean you use more power.
>Remember to turn the lights off whenever you leave a room. That includes fluorescent lights, though very frequent turning on and off of these lights should be avoided because it shortens their life span.
> Take note that a low- wattage light placed closer to where it is needed is more efficient than using a stronger light placed further away.
> Avoid lights with multiple bulbs as they are inefficient- about six 25-watt bulbs are neededd to match the brightness of one 100-watt bulb.
> Don't install light fittings that obscure the light.
> Use timers or light or heat sensors to control outside lights.
> Install contact switches in cupboards so that lights go on when you open the cupboard and off when you close it.
> Use dimmer switches to reduce energy use. Any light bulbs dimmed by 25% will use roughly 20% less energy. They can be attached to all incandescent light fittings, though you will need a special transformer for low-wattage halogen lamps. They do not work with tubes or CFLs.
>Remember to turn the lights off whenever you leave a room. That includes fluorescent lights, though very frequent turning on and off of these lights should be avoided because it shortens their life span.
> Take note that a low- wattage light placed closer to where it is needed is more efficient than using a stronger light placed further away.
> Avoid lights with multiple bulbs as they are inefficient- about six 25-watt bulbs are neededd to match the brightness of one 100-watt bulb.
> Don't install light fittings that obscure the light.
> Use timers or light or heat sensors to control outside lights.
> Install contact switches in cupboards so that lights go on when you open the cupboard and off when you close it.
> Use dimmer switches to reduce energy use. Any light bulbs dimmed by 25% will use roughly 20% less energy. They can be attached to all incandescent light fittings, though you will need a special transformer for low-wattage halogen lamps. They do not work with tubes or CFLs.
No comments:
Post a Comment